Yokomo DPR Hamachi-Style, part 2.

Yokomo DPR Hamachi-Style, part 2.

A parts breakdown of Hayato Yoshiba's 2WD setting sheet.

This is Hayato Yoshiba's setting sheet for a Type-C w/ the D-162P 2WD conversion installed:

As you can see, it is designed for Yatabe Area, which is an indoor asphalt track with medium traction. My local course in also indoors, but is a polished and sealed concrete floor, so there will be some difference. However, I would like to start with this setting for the DPR and go from there.

Parts Lists

In addition to obvious parts from the D-162P conversion kit, there are parts used but not included with either the DPR or Type-C. Some of these are minor, such as wheel or suspension block spacers, while others are more substantial, as new suspension arms or steering blocks. Here are the parts that I will be purchasing as I do not need a complete 201 kit:

• Front Suspension Parts (for the DPR)
•  D-163 Aluminum Steering Bell Crank for 2WD Drift Conversion PRO/RS 201
•  D-164 Aluminum Front Lower A-Arm fro 2WD Drift Conversion PRO/RS 201
•  D-166 Aluminum Front Steering Block for 2WD (L/R)
•  D-171G Progressive Drift Spring 1.3x9.5 turn (Green)
•  SD-300S Aluminum Suspension Mount Spacer*
•  ZC-A36## Aluminum 3.0 x 6.0 x ## Spacer (Blue)**
• 2x A3620 for the bell cranks
• 2x A3620 for the steering block upper king pins
• 2x A3630 for the steering block lower king pins
• 2x A3630 for the front front suspension block (FF)
• 2x A3620 for the front rear suspension block (FR)
• 2x A3615 for the front rear suspension block (FR)
• Rear Suspension Parts (for the DPR)
• D-026 Aluminum Rear Shock Tower
• D-171G Progressive Drift Spring 1.3x9.5 turn (Green)
• RR1.0 Suspension Block***
• SD-008HG Graphite H.D. Lower Suspension Arm
• SD-415G10 Graphite Rear Hub Carrier (Toe-in 1.0)****
• SD-501DS or SD-501 DA Ball Differential
• ZC-A36## Aluminum 3.0 x 6.0 x ## Spacer (Blue)
• 2x A3610- for the rear front suspension block (RF)
• 2x A3630 - for the rear rear suspension block (RR)  
• ZS-011EL Aluminum Light Weight Wheel Hub

* You don't need to purchase these as the spacers used for the rear suspension blocks are not used and you can use them for the front suspension blocks.

** The DPR comes with spacers for the suspension arms, but the 2WD arms are not as wide as the stock ones, hence the 3.0mm spacer in the front and the 3.5mm worth of spacers in the rear.

*** I'm not sure what block is used as Yokomo does not offer a RR1.0 block.

**** The rear hub carriers are swappable so they can either be a 1.0 toe-out or a 1.0 toe-in block. Flipping the blocks and using them with the stock RR2.0 rear suspension mount results in a 1.0 degree rear toe-in.